BHP Chamfered Commander Hammer-Sear DUTY CARRY Spring Set

This set includes the BHP Commander Chamfered Hammer and the CNC sear. The size of the ring has been reduced to be the same as on a Colt commander hammer and has been raised as high as possible. The edges of the hammer are chamfered for comfortable non snag carry. Made from our special tooled steel and Rockwell C tested at 50-55. The sear is cut from tool steel plate stock by CNC wire EDM and finish machined on CNC machine to exacting tolerances. Heat treated to 50-55 Rc. We highly recommend using our 18.5 pound recoil spring in conjunction with this set. This helps balance the action out as this kit contains a 26 pound hammer spring and the factory hammer spring is 32 pounds. The 18.5 pound recoil spring is part number CS40718.

Your existing thumb safety may require re-fitting